#
# this config file was automatically generated
# using lirc-0.5.5pre8 on Sun Apr 18 11:43:45 1999
#
# contributed by Jens Leuschner <leuschner@gmx.net>
#
# brand:             Hauppauge
# model:             
# supported devices: WinTV primo; WinTV pci; WinTV radio
#
# This config file will work with both homebrew receivers and 
# original Hauppauge TV cards !!!
#
# Hauppauge WinTV-Nova-T UK
# James Richardson (from original by Rob Shortt)

begin remote

  name  hauppauge_nova_t_uk
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           969   811
  zero          969   811
  plead        1097
  gap          114605
  toggle_bit      2

      begin codes
          POWER                    0x80010164
          GO                       0x80010162
          1                        0x80010002
          2                        0x80010003
          3                        0x80010004
          4                        0x80010005
          5                        0x80010006
          6                        0x80010007
          7                        0x80010008
          8                        0x80010009
          9                        0x8001000a
          0                        0x8001000b
          MENU                     0x80010071
          BLANK                    0x80010074
          PLAY                     0x800100cf
          FORWARD                  0x800100d0
          RED                      0x8001018e
          GREEN                    0x8001008b
          YELLOW                   0x80010182
          BLUE                     0x80010077
          CH+                      0x80010192
          CH-                      0x80010193
          VOL-                     0x80010072
          VOL+                     0x80010073
          OK                       0x80010160
          MUTE                     0x8001001e
          BLANK                    0x80010166
          FULL                     0x800100ae
          REWIND                   0x800100a8
          BACK/EXIT                0x8001019b
          RECORD                   0x800100a7
          STOP                     0x80010080
          PAUSE                    0x80010199
          REPLAY                   0x80010198
          SKIP                     0x80010165
      end codes
end remote
